Skip to main content
Version: Latest-3.3

Metadata Recovery

This topic describes how to recover the metadata in your StarRocks clusters when FE nodes encounter different exceptions.

Generally, you may have to resort to metadata recovery when and only when one of the following issues occurs:

Check the issue you encountered, follow the solution provided in the corresponding section, and perform any recommended actions.

FE fails to restart​

FE nodes may fail to restart if the metadata is damaged or incompatible with the cluster after rollback.

Metadata incompatibility after rollback​

When you downgrade your StarRocks cluster, FEs may fail to restart if the metadata is incompatible with that before the downgrade.

You can identify this issue if you encounter the following exception while downgrading the cluster:

UNKNOWN Operation Type xxx

You can follow these steps to recover the metadata and start FE:

  1. Stop all FE nodes.

  2. Back up the metadata directories meta_dir of all FE nodes.

  3. Add the configuration ignore_unknown_log_id = true to the configuration files fe.conf of all FE nodes.

  4. Start all FE nodes, and check whether your data and metadata are intact.

  5. If both your data and metadata are intact, execute the following statement to create an image file for your metadata:

    ALTER SYSTEM CREATE IMAGE;

  6. After the new image file is transmitted to the directory meta/image of all FE nodes, you can remove the configuration ignore_unknown_log_id = true from all FE configuration files and restart the FE nodes.

Metadata damage​

Both damage to BDBJE metadata and StarRocks metadata will cause failures to restart.

BDBJE metadata damage​

VLSN Bug​

You can identify the VLSN bug based on the following error message:

recoveryTracker should overlap or follow on disk last VLSN of 6,684,650 recoveryFirst= 6,684,652 UNEXPECTED_STATE_FATAL: Unexpected internal state, unable to continue. Environment is invalid and must be closed.

You can follow these steps to fix this issue:

  1. Clear the metadata directory meta_dir of the FE node that throws this exception.

  2. Restart the FE node using the Leader FE node as the helper.

    # Replace <leader_ip> with the IP address (priority_networks) 
    # of the Leader FE node, and replace <leader_edit_log_port> (Default: 9010) with 
    # the Leader FE node's edit_log_port.
    ./fe/bin/start_fe.sh --helper <leader_ip>:<leader_edit_log_port> --daemon
tip
  • This bug has been fixed in StarRocks v3.1. You can avoid this issue by upgrading your cluster to v3.1 or later.
  • This solution does not apply if more than half of the FE nodes have encountered this issue. You must follow the instructions provided in Measure of the last resort to fix the issue.
RollbackException​

You can identify this issue based on the following error message:

must rollback 1 total commits(1 of which were durable) to the earliest point indicated by transaction id=-14752149 time=2022-01-12 14:36:28.21 vlsn=28,069,415 lsn=0x1174/0x16e durable=false in order to rejoin the replication group. All existing ReplicatedEnvironment handles must be closed and reinstantiated. Log files were truncated to file 0x4467, offset 0x269, vlsn 28,069,413 HARD_RECOVERY: Rolled back past transaction commit or abort. Must run recovery by re-opening Environment handles Environment is invalid and must be closed.

This issue occurs when the Leader FE node writes BDBJE metadata but fails to synchronize it to Follower FE nodes before it hangs. After being restarted, the original Leader becomes a Follower, corrupting the metadata.

To solve this issue, you only need to restart this node again to wipe out the dirty metadata.

ReplicaWriteException​

You can identify this issue based on the keyword removeReplicaDb from the FE log fe.log.

Caused by: com.sleepycat.je.rep.ReplicaWriteException: (JE 18.3.16) Problem closing transaction 25000090. The current state is:REPLICA. The node transitioned to this state at:Fri Feb 23 01:31:00 UTC 2024 Problem seen replaying entry NameLN_TX/14 vlsn=1,902,818,939 isReplicated="1"  txn=-953505106 dbop=REMOVE Originally thrown by HA thread: REPLICA 10.233.132.23_9010_1684154162022(6)
        at com.sleepycat.je.rep.txn.ReadonlyTxn.disallowReplicaWrite(ReadonlyTxn.java:114) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.dbi.DbTree.checkReplicaWrite(DbTree.java:880) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.dbi.DbTree.doCreateDb(DbTree.java:579) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.dbi.DbTree.createInternalDb(DbTree.java:507) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.cleaner.ExtinctionScanner.openDb(ExtinctionScanner.java:357) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.cleaner.ExtinctionScanner.prepareForDbExtinction(ExtinctionScanner.java:1703) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.dbi.DbTree.doRemoveDb(DbTree.java:1208) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.dbi.DbTree.removeReplicaDb(DbTree.java:1261) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.rep.impl.node.Replay.applyNameLN(Replay.java:996) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.rep.impl.node.Replay.replayEntry(Replay.java:722) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.rep.impl.node.Replica$ReplayThread.run(Replica.java:1225) ~[starrocks-bdb-je-18.3.16.jar:?]

This issue occurs when the BDBJE version of the failed FE node (v18.3.16) mismatches that of the Leader FE node (v7.3.7).

You can follow these steps to fix this issue:

  1. Drop the failed Follower or Observer node.

    -- To drop a Follower node, replace <follower_host> with the IP address (priority_networks) 
    -- of the Follower node, and replace <follower_edit_log_port> (Default: 9010) with 
    -- the Follower node's edit_log_port.
    ALTER SYSTEM DROP FOLLOWER "<follower_host>:<follower_edit_log_port>";

    -- To drop an Observer node, replace <observer_host> with the IP address (priority_networks) 
    -- of the Observer node, and replace <observer_edit_log_port> (Default: 9010) with 
    -- the Observer node's edit_log_port.
    ALTER SYSTEM DROP OBSERVER "<observer_host>:<observer_edit_log_port>";

  2. Add the failed node back to the cluster.

    -- Add the Follower node:
    ALTER SYSTEM ADD FOLLOWER "<follower_host>:<follower_edit_log_port>";

    -- Add the Observer node:
    ALTER SYSTEM ADD OBSERVER "<observer_host>:<observer_edit_log_port>";

  3. Clear the metadata directory meta_dir of the failed node.

  4. Restart the failed node using the Leader FE node as the helper.

    # Replace <leader_ip> with the IP address (priority_networks) 
    # of the Leader FE node, and replace <leader_edit_log_port> (Default: 9010) with 
    # the Leader FE node's edit_log_port.
    ./fe/bin/start_fe.sh --helper <leader_ip>:<leader_edit_log_port> --daemon

  5. After the failed node recovers to a healthy status, you need to upgrade the BDBJE packages in your cluster to starrocks-bdb-je-18.3.16.jar (or upgrade your StarRocks cluster to v3.0 or later), following the order of Followers first and then the Leader.

InsufficientReplicasException​

You can identify this issue based on the following error message:

com.sleepycat.je.rep.InsufficientReplicasException: (JE 7.3.7) Commit policy: SIMPLE_MAJORITY required 1 replica. But none were active with this master.

This issue occurs when the Leader node or Follower nodes use excessive memory resources, leading to Full GC.

To solve this issue, you can either increase the JVM heap size or use the G1 GC algorithm.

InsufficientLogException​

You can identify this issue based on the following error message:

xxx INSUFFICIENT_LOG: Log files at this node are obsolete. Environment is invalid and must be closed.

This issue occurs when the Follower node requires full metadata synchronization. It may occur when one of the following situations happens:

  • The metadata on the Follower node lags behind that of the Leader node, which has already done a CheckPoint of metadata within itself. The Follower node cannot perform incremental updates on its metadata, thus full metadata synchronization is required.
  • The original Leader node writes and checkpoints its metadata, but fails to synchronize it to Follower FE nodes before it hangs. After being restarted, it becomes a Follower node. With dirty metadata checkpointed, the Follower node cannot perform incremental deletion of its metadata, thus full metadata synchronization is required.

Please note that this exception will be thrown when a new Follower node is added to the cluster. In this case, you do not need to take any action. If this exception is thrown for an existing Follower node or the Leader node, you only need to restart the node.

HANDSHAKE_ERROR: Error during the handshake between two nodes​

You can identify this issue based on the following error message:

2023-11-13 21:51:55,271 WARN (replayer|82) [BDBJournalCursor.wrapDatabaseException():97] failed to get DB names for 1 times!Got EnvironmentFailureExce
com.sleepycat.je.EnvironmentFailureException: (JE 18.3.16) Environment must be closed, caused by: com.sleepycat.je.EnvironmentFailureException: Environment invalid because of previous exception: (JE 18.3.16) 10.26.5.115_9010_1697071897979(1):/data1/meta/bdb A replica with the name: 10.26.5.115_9010_1697071897979(1) is already active with the Feeder:null HANDSHAKE_ERROR: Error during the handshake between two nodes. Some validity or compatibility check failed, preventing further communication between the nodes. Environment is invalid and must be closed.
        at com.sleepycat.je.EnvironmentFailureException.wrapSelf(EnvironmentFailureException.java:230) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.dbi.EnvironmentImpl.checkIfInvalid(EnvironmentImpl.java:1835) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.dbi.EnvironmentImpl.checkOpen(EnvironmentImpl.java:1844) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.Environment.checkOpen(Environment.java:2697) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.Environment.getDatabaseNames(Environment.java:2455) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.starrocks.journal.bdbje.BDBEnvironment.getDatabaseNamesWithPrefix(BDBEnvironment.java:478) ~[starrocks-fe.jar:?]
        at com.starrocks.journal.bdbje.BDBJournalCursor.refresh(BDBJournalCursor.java:177) ~[starrocks-fe.jar:?]
        at com.starrocks.server.GlobalStateMgr$5.runOneCycle(GlobalStateMgr.java:2148) ~[starrocks-fe.jar:?]
        at com.starrocks.common.util.Daemon.run(Daemon.java:115) ~[starrocks-fe.jar:?]
        at com.starrocks.server.GlobalStateMgr$5.run(GlobalStateMgr.java:2216) ~[starrocks-fe.jar:?]
Caused by: com.sleepycat.je.EnvironmentFailureException: Environment invalid because of previous exception: (JE 18.3.16) 10.26.5.115_9010_1697071897979(1):/data1/meta/bdb A replica with the name: 10.26.5.115_9010_1697071897979(1) is already active with the Feeder:null HANDSHAKE_ERROR: Error during the handshake between two nodes. Some validity or compatibility check failed, preventing further communication between the nodes. Environment is invalid and must be closed. Originally thrown by HA thread: UNKNOWN 10.26.5.115_9010_1697071897979(1) Originally thrown by HA thread: UNKNOWN 10.26.5.115_9010_1697071897979(1)
        at com.sleepycat.je.rep.stream.ReplicaFeederHandshake.negotiateProtocol(ReplicaFeederHandshake.java:198) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.rep.stream.ReplicaFeederHandshake.execute(ReplicaFeederHandshake.java:250) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.rep.impl.node.Replica.initReplicaLoop(Replica.java:709) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.rep.impl.node.Replica.runReplicaLoopInternal(Replica.java:485) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.rep.impl.node.Replica.runReplicaLoop(Replica.java:412) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.rep.impl.node.RepNode.run(RepNode.java:1869) ~[starrocks-bdb-je-18.3.16.jar:?]

This issue occurs when the original Leader node hangs and becomes alive again while the surviving Follower nodes are trying to elect a new Leader node. The Follower nodes will try to establish a new connection with the original Leader node. However, the Leader node will reject the connection request because the old connection still exists. Once the request is rejected, the Follower node will set the environment as invalid and throw this exception.

To solve this issue, you can either increase the JVM heap size or use the G1 GC algorithm.

Latch timeout. com.sleepycat.je.log.LogbufferPool_FullLatch​

You can identify this issue based on the following error message:

Environment invalid because of previous exception: xxx Latch timeout. com.sleepycat.je.log.LogbufferPool_FullLatch xxx'
        at com.sleepycat.je.EnvironmentFailureException.unexpectedState(EnvironmentFailureException.java:459)
        at com.sleepycat.je.latch.LatchSupport.handleTimeout(LatchSupport.java:211)
        at com.sleepycat.je.latch.LatchWithStatsImpl.acquireExclusive(LatchWithStatsImpl.java:87)
        at com.sleepycat.je.log.LogBufferPool.bumpCurrent(LogBufferPool.java:527)
        at com.sleepycat.je.log.LogManager.flushInternal(LogManager.java:1373)
        at com.sleepycat.je.log.LogManager.flushNoSync(LogManager.java:1337)
        at com.sleepycat.je.log.LogFlusher$FlushTask.run(LogFlusher.java:232)
        at java.util.TimerThread.mainLoop(Timer.java:555)
        at java.util.TimerThread.run(Timer.java:505)

This issue occurs when there is excessive pressure on the local disk of the FE node.

To solve this issue, you can allocate a dedicated disk for the FE metadata, or replace the disk with a high-performance one.

DatabaseNotFoundException​

You can identify this issue based on the following error message:

2024-01-05 12:47:21,087 INFO (main|1) [BDBEnvironment.ensureHelperInLocal():340] skip check local environment because helper node and local node are identical.
2024-01-05 12:47:21,339 ERROR (MASTER 172.17.0.1_9112_1704430041062(-1)|1) [StarRocksFE.start():186] StarRocksFE start failed
com.sleepycat.je.DatabaseNotFoundException: (JE 18.3.16) _jeRepGroupDB
        at com.sleepycat.je.rep.impl.RepImpl.openGroupDb(RepImpl.java:1974) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.rep.impl.RepImpl.getGroupDb(RepImpl.java:1912) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.rep.impl.RepGroupDB.reinitFirstNode(RepGroupDB.java:1439) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.rep.impl.node.RepNode.reinitSelfElect(RepNode.java:1686) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.rep.impl.node.RepNode.startup(RepNode.java:874) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.rep.impl.node.RepNode.joinGroup(RepNode.java:2153) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.rep.impl.RepImpl.joinGroup(RepImpl.java:618) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.rep.ReplicatedEnvironment.joinGroup(ReplicatedEnvironment.java:558) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.rep.ReplicatedEnvironment.<init>(ReplicatedEnvironment.java:619) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.rep.ReplicatedEnvironment.<init>(ReplicatedEnvironment.java:464) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.rep.ReplicatedEnvironment.<init>(ReplicatedEnvironment.java:538) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.sleepycat.je.rep.util.DbResetRepGroup.reset(DbResetRepGroup.java:262) ~[starrocks-bdb-je-18.3.16.jar:?]
        at com.starrocks.journal.bdbje.BDBEnvironment.initConfigs(BDBEnvironment.java:188) ~[starrocks-fe.jar:?]
        at com.starrocks.journal.bdbje.BDBEnvironment.setup(BDBEnvironment.java:174) ~[starrocks-fe.jar:?]
        at com.starrocks.journal.bdbje.BDBEnvironment.initBDBEnvironment(BDBEnvironment.java:153) ~[starrocks-fe.jar:?]
        at com.starrocks.journal.JournalFactory.create(JournalFactory.java:31) ~[starrocks-fe.jar:?]
        at com.starrocks.server.GlobalStateMgr.initJournal(GlobalStateMgr.java:1201) ~[starrocks-fe.jar:?]
        at com.starrocks.server.GlobalStateMgr.initialize(GlobalStateMgr.java:1150) ~[starrocks-fe.jar:?]
        at com.starrocks.StarRocksFE.start(StarRocksFE.java:129) ~[starrocks-fe.jar:?]
        at com.starrocks.StarRocksFE.main(StarRocksFE.java:83) ~[starrocks-fe.jar:?]

This issue occurs when you add the configuration metadata_failure_recovery = true in the FE configuration file fe.conf.

To solve this issue, you need to remove the configuration and restart the node.

StarRocks metadata damage​

You can identify the StarRocks metadata damage issue based on one of the following error messages:

failed to load journal type xxx

Or

catch exception when replaying
warning

Before proceeding to recover the metadata by following the solution provided below, you are strongly advised to seek assistance from the technical experts in the StarRocks community, because this solution may lead to data loss.

You can follow these steps to fix this issue:

  1. Stop all FE nodes.

  2. Back up the metadata directories meta_dir of all FE nodes.

  3. Add the configuration metadata_enable_recovery_mode = true to the configuration files fe.conf of all FE nodes. Note that data loading is forbidden in this mode.

  4. Start all FE nodes, and query tables in the cluster to check whether your data is intact.

    You must wait until metadata recovery is completed if the following error is returned when you query these tables:

    ERROR 1064 (HY000): capture_consistent_versions error: version already been compacted.

    You can execute the following statement from the Leader FE node to view the progress of metadata recovery:

    SHOW PROC '/meta_recovery';

    This statement will show the partitions that failed to be recovered. You can follow the advice returned to recover the partitions. If nothing is returned, it indicates the recovery is successful.

  5. If both your data and metadata are intact, execute the following statement to create an image file for your metadata:

    ALTER SYSTEM CREATE IMAGE;

  6. After the new image file is transmitted to the directory meta/image of all FE nodes, you can remove the configuration metadata_enable_recovery_mode = true from all FE configuration files and restart the FE nodes.

FE fails to provide services​

FE will not provide services when Follower FE nodes fail to perform Leader election. When this issue occurs, you may find the following log record repeating:

wait globalStateMgr to be ready. FE type: INIT. is ready: false

A variety of exceptions may cause this issue. You are strongly advised to troubleshoot the issue step by step following the sections below. Applying inappropriate solutions will deteriorate the problem and probably lead to data loss.

1. The majority of Follower nodes are not running​

If the majority of the Follower nodes are not running, the FE group will not provide services. Here, 'majority' indicates 1 + (Follower node count/2). Please note that the Leader FE node itself is a Follower, but Observer nodes are not Followers.

  • You can identify the role of each FE node from the fe/meta/image/ROLE file:

    cat fe/meta/image/ROLE

    #Fri Jan 19 20:03:14 CST 2024
    role=FOLLOWER
    hostType=IP
    name=172.26.92.154_9312_1705568349984

  • You can view the total number of Follower nodes from the BDBJE log:

    grep "Current group size" fe/meta/bdb/je.info.0

    # The example output indicates there are three Follower nodes in the cluster.
    2024-01-24 08:21:44.754 UTC INFO [172.26.92.139_29917_1698226672727] Current group size: 3

To solve this issue, you need to start all Follower nodes in the cluster. If they cannot be restarted, please refer to The measure of last resort.

2. Node IP is changed​

If the priority_networks of the node is not configured, the FE node will randomly select an available IP address once it is restarted. If the IP address recorded in the BDBJE metadata is different from that used to start the node, the FE will not provide services.

  • You can view the IP address recorded in the BDBJE metadata from the fe/meta/image/ROLE file:

    cat fe/meta/image/ROLE

    #Fri Jan 19 20:03:14 CST 2024
    role=FOLLOWER
    hostType=IP
    name=172.26.92.154_9312_1705568349984

    The value 172.26.92.154 before the first underscore is the IP address recorded in the BDBJE metadata.

  • You can view the IP address used to start the node from the FE log:

    grep "IP:" fe/log/fe.log

    2024-02-06 14:33:58,211 INFO (main|1) [FrontendOptions.initAddrUseIp():249] Use IP init local addr, IP: /172.17.0.1
    2024-02-06 14:34:27,689 INFO (main|1) [FrontendOptions.initAddrUseIp():249] Use IP init local addr, IP: /172.17.0.1

To solve this issue, you need to set the priority_networks of the node in the FE configuration file fe.conf to the IP address recorded in fe/meta/image/ROLE, and restart the node.

3. System clock among nodes is not synchronized​

You can identify this issue based on the following error message from fe.out, fe.log or fe/meta//bdb/je.info.0:

com.sleepycat.je.EnvironmentFailureException: (JE 7.3.7) Environment must be closed, caused by: com.sleepycat.je.EnvironmentFailureException: Environment invalid because of previous exception: (JE 7.3.7) 172.26.92.139_29917_1631006307557(2180):xxx Clock delta: 11020 ms. between Feeder: 172.26.92.154_29917_1641969377236 and this Replica exceeds max permissible delta: 5000 ms. HANDSHAKE_ERROR: Error during the handshake between two nodes. Some validity or compatibility check failed, preventing further communication between the nodes. Environment is invalid and must be closed. fetchRoot of 0x1278/0x1fcbb8 state=0 expires=never

You must synchronize the system clock among all nodes.

4. Available disk space is insufficient​

After you upgrade StarRocks to v3.0 or later, or upgrade BDBJE to v18 or later, the node may fail to restart when the available space of the disk that stores meta_dir is less than 5 GB.

You can view the BDBJE version from the .jar package under the directory fe/lib.

To solve this issue, you can scale up the disk, or allocate a dedicated disk with larger capacity for the FE metadata.

5. edit_log_port is changed​

If the edit_log_port recorded in the BDBJE metadata is different from that configured in fe.conf, the FE will not provide services.

You can view the edit_log_port recorded in the BDBJE metadata from the fe/meta/image/ROLE file:

cat fe/meta/image/ROLE

#Fri Jan 19 20:03:14 CST 2024
role=FOLLOWER
hostType=IP
name=172.26.92.154_9312_1705568349984

The value 9312 before the second underscore is the edit_log_port recorded in the BDBJE metadata.

To solve this issue, you need to set the edit_log_port of the node in the FE configuration file fe.conf to the edit_log_port recorded in fe/meta/image/ROLE, and restart the node.

6. JVM heap size is insufficient​

You can view the JVM memory usage using the jstat command:

jstat -gcutil pid 1000 1000

  S0     S1     E      O      M     CCS    YGC     YGCT    FGC    FGCT     GCT
  0.00 100.00  27.78  95.45  97.77  94.45     24    0.226     1    0.065    0.291
  0.00 100.00  44.44  95.45  97.77  94.45     24    0.226     1    0.065    0.291
  0.00 100.00  55.56  95.45  97.77  94.45     24    0.226     1    0.065    0.291
  0.00 100.00  72.22  95.45  97.77  94.45     24    0.226     1    0.065    0.291
  0.00 100.00  88.89  95.45  97.77  94.45     24    0.226     1    0.065    0.291
  0.00 100.00   5.26  98.88  97.80  94.45     25    0.231     1    0.065    0.297
  0.00 100.00  21.05  98.88  97.80  94.45     25    0.231     1    0.065    0.297
  0.00 100.00  31.58  98.88  97.80  94.45     25    0.231     1    0.065    0.297
  0.00 100.00  47.37  98.88  97.80  94.45     25    0.231     1    0.065    0.297
  0.00 100.00  63.16  98.88  97.80  94.45     25    0.231     1    0.065    0.297
  0.00 100.00  73.68  98.88  97.80  94.45     25    0.231     1    0.065    0.297

If the percentages shown in field O remain high, it indicates that the JVM heap size is insufficient.

To solve this issue, you must increase the JVM heap size.

7. Measure of the last resort​

warning

You can try the following solution as the last resort only when none of the preceding solutions works.

This solution is designed only for extreme cases, such as:

  • The majority of Follower nodes cannot be restarted.
  • Follower nodes cannot perform Leader election due to bugs of BDBJE.
  • Exceptions other than those mentioned in preceding sections.

Follow these steps to recover the metadata:

  1. Stop all FE nodes.

  2. Back up the metadata directories meta_dir of all FE nodes.

  3. Run the following commands on all the servers that host the FE nodes to identify the node with the latest metadata.

    • For StarRocks v2.5 and earlier:

      java -jar fe/lib/je-7.3.7.jar DbPrintLog -h meta/bdb/ -vd

    • For StarRocks v3.0 and later:

      # You need to specify the exact .jar package the node uses in the command 
      # as the package varies according to the StarRocks version.
      java -jar fe/lib/starrocks-bdb-je-18.3.16.jar DbPrintLog -h meta/bdb/ -vd

    Example output:

    <DbPrintLog>
    file 0x3b numRepRecords = 24479 firstVLSN = 1,434,126 lastVLSN = 1,458,604
    file 0x3c numRepRecords = 22541 firstVLSN = 1,458,605 lastVLSN = 1,481,145
    file 0x3d numRepRecords = 25176 firstVLSN = 1,481,146 lastVLSN = 1,506,321
    ......
    file 0x74 numRepRecords = 26903 firstVLSN = 2,927,458 lastVLSN = 2,954,360
    file 0x75 numRepRecords = 26496 firstVLSN = 2,954,361 lastVLSN = 2,980,856
    file 0x76 numRepRecords = 18727 firstVLSN = 2,980,857 lastVLSN = 2,999,583
    ... 0 files at end
    First file: 0x3b
    Last file: 0x76
    </DbPrintLog>

    The node with the largest lastVLSN value has the latest metadata.

  4. Find the role (Follower or Observer) of the FE node that has the latest metadata from the fe/meta/image/ROLE file:

    cat fe/meta/image/ROLE

    #Fri Jan 19 20:03:14 CST 2024
    role=FOLLOWER
    hostType=IP
    name=172.26.92.154_9312_1705568349984

    If multiple nodes have the latest metadata, it is recommended to proceed with a Follower node. If multiple Follower nodes have the latest metadata, you can proceed with any of them.

  5. Perform the corresponding operations based on the role of the FE node you chose in the previous step.

If a Follower node has the latest metadata, perform the following operations:

  1. Add the following configurations to fe.conf:

    • For StarRocks v2.5, v3.0, v3.1.9 and earlier patch versions, and v3.2.4 and earlier patch versions:

      metadata_failure_recovery = true

    • For StarRocks v3.1.10 and later patch versions, v3.2.5 and later patch versions, and v3.3 and later:

      bdbje_reset_election_group = true

  2. Restart the node, and check whether your data and metadata are intact.

  3. Check whether the current FE node is the Leader FE node.

    SHOW FRONTENDS;
    • If the field Alive is true, this FE node is properly started and added to the cluster.
    • If the field Role is LEADER, this FE node is the Leader FE node.

  4. If the data and metadata are intact, and the role of the node is Leader, you can remove the configuration you added earlier and restart the node.

  1. The surviving Follower node is now essentially the Leader node of the cluster. Drop all FE nodes except for the current node.

    -- To drop a Follower node, replace <follower_host> with the IP address (priority_networks) 
    -- of the Follower node, and replace <follower_edit_log_port> (Default: 9010) with 
    -- the Follower node's edit_log_port.
    ALTER SYSTEM DROP FOLLOWER "<follower_host>:<follower_edit_log_port>";

    -- To drop an Observer node, replace <observer_host> with the IP address (priority_networks) 
    -- of the Observer node, and replace <observer_edit_log_port> (Default: 9010) with 
    -- the Observer node's edit_log_port.
    ALTER SYSTEM DROP OBSERVER "<observer_host>:<observer_edit_log_port>";

  2. Clear the metadata directories meta_dir of the FE nodes that you want to add back to the cluster.

  3. Start new Follower nodes using the new Leader FE node as the helper.

    # Replace <leader_ip> with the IP address (priority_networks) 
    # of the Leader FE node, and replace <leader_edit_log_port> (Default: 9010) with 
    # the Leader FE node's edit_log_port.
    ./fe/bin/start_fe.sh --helper <leader_ip>:<leader_edit_log_port> --daemon

  4. Add the Follower nodes back to the cluster.

    ALTER SYSTEM ADD FOLLOWER "<new_follower_host>:<new_follower_edit_log_port>";

After all nodes are added back to the cluster, the metadata is successfully recovered.

Recover metadata on a new FE node with metadata backup​

Follow these steps if you want to start a new FE node with the metadata backup:

  1. Copy the backup metadata directory meta_dir to the new FE node.

  2. In the configuration file of the FE node, set bdbje_reset_election_group to true.

    bdbje_reset_election_group = true

  3. Start the FE node.

    ./fe/bin/start_fe.sh

  4. Check whether the current FE node is the Leader FE node.

    SHOW FRONTENDS;

    If the field Role is LEADER, this FE node is the Leader FE node. Make sure its IP address is the that of the current FE node.

  5. If the data and metadata are intact, and the role of the node is Leader, you must remove the configuration bdbje_reset_election_group and restart the node.

  6. Now you have successfully start a new Leader FE node with the metadata backup. You can add new Follower nodes using the new Leader FE node as the helper.

    # Replace <leader_ip> with the IP address (priority_networks) 
    # of the Leader FE node, and replace <leader_edit_log_port> (Default: 9010) with 
    # the Leader FE node's edit_log_port.
    ./fe/bin/start_fe.sh --helper <leader_ip>:<leader_edit_log_port> --daemon
tip

You must remove the following configuration once the metadata recovery is completed.