Skip to main content
Version: 2.5

ALTER TABLE

Description

Modifies an existing table, including:

Syntax

ALTER TABLE [database.]table
alter_clause1[, alter_clause2, ...]

alter_clause is classified into six operations: partition, rollup, schema change, rename, index, and swap.

  • rename: renames a table, rollup index, or partition.
  • comment: modifies the table comment (supported from v3.1 onwards).
  • partition: modifies partition properties, drops a partition, or adds a partition.
  • bucket: modifies the bucketing method and number of buckets.
  • column: adds, drops, or reorders columns, or modifies column type.
  • rollup index: creates or drops a rollup index.
  • bitmap index: modifies index (only Bitmap index can be modified).
  • swap: atomic exchange of two tables.

Limits and usage notes

  • Operations on partition, column, and rollup index cannot be performed in one ALTER TABLE statement.
  • Column names cannot be modified.
  • Column comments cannot be modified.
  • One table can have only one ongoing schema change operation at a time. You cannot run two schema change commands on a table at the same time.
  • Operations on bucket, column and rollup index are asynchronous operations. A success message is return immediately after the task is submitted. You can run the SHOW ALTER TABLE command to check the progress, and run the CANCEL ALTER TABLE command to cancel the operation.
  • Operations on rename, comment, partition, bitmap index and swap are synchronous operations, and a command return indicates that the execution is finished.

Rename

Rename supports modification of table name, rollup index, and partition name.

Rename a table

ALTER TABLE <tbl_name> RENAME <new_tbl_name>

Rename a rollup index

ALTER TABLE [<db_name>.]<tbl_name>
RENAME ROLLUP <old_rollup_name> <new_rollup_name>

Rename a partition

ALTER TABLE [<db_name>.]<tbl_name>
RENAME PARTITION <old_partition_name> <new_partition_name>

Modify partition

Add a partition

Syntax:

ALTER TABLE [database.]table 
ADD PARTITION [IF NOT EXISTS] <partition_name>
partition_desc ["key"="value"]
[DISTRIBUTED BY HASH (k1[,k2 ...]) [BUCKETS num]];

Note:

  1. Partition_desc supports the following two expressions:

    VALUES LESS THAN [MAXVALUE|("value1", ...)]
    VALUES ("value1", ...), ("value1", ...)
  2. partition is the left-closed-right-open interval. If the user only specifies the right boundary, the system will automatically determine the left boundary.

  3. If the bucket mode is not specified, the bucket method used by the built-in table is automatically used.

  4. If the bucket mode is specified, only the bucket number can be modified, and the bucket mode or bucket column cannot be modified.

  5. User can set some properties of the partition in ["key"="value"]. See CREATE TABLE for details.

Drop a partition

Syntax:

-- Before 2.0
ALTER TABLE [database.]table
DROP PARTITION [IF EXISTS | FORCE] <partition_name>
-- 2.0 or later
ALTER TABLE [database.]table
DROP PARTITION [IF EXISTS] <partition_name> [FORCE]

Note:

  1. Keep at least one partition for partitioned tables.
  2. After executing DROP PARTITION for a while, the dropped partition can be recovered by the RECOVER statement. See the RECOVER statement for details.
  3. If DROP PARTITION FORCE is executed, the partition will be deleted directly and cannot be recovered without checking whether there are any unfinished activities on the partition. Thus, generally this operation is not recommended.

Add a temporary partition

Syntax:

ALTER TABLE [database.]table 
ADD TEMPORARY PARTITION [IF NOT EXISTS] <partition_name>
partition_desc ["key"="value"]
[DISTRIBUTED BY HASH (k1[,k2 ...]) [BUCKETS num]]

Use a temporary partition to replace current partition

Syntax:

ALTER TABLE [database.]table
REPLACE PARTITION <partition_name>
partition_desc ["key"="value"]
WITH TEMPORARY PARTITION
partition_desc ["key"="value"]
[PROPERTIES ("key"="value", ...)]

Drop a temporary partition

Syntax:

ALTER TABLE [database.]table
DROP TEMPORARY PARTITION <partition_name>

Modify partition properties

Syntax:

ALTER TABLE [database.]table
MODIFY PARTITION p1|(p1[, p2, ...]) SET ("key" = "value", ...)

Note:

  1. The following properties of a partition can be modified:

    • storage_medium
    • storage_cooldown_time
    • replication_num
    • in_memory
  2. For single-partition tables, partition name is the same as the table name.

Schema change

Schema change supports the following modifications.

Add a column to specified location of specified index

Syntax:

ALTER TABLE [database.]table
ADD COLUMN column_name column_type [KEY | agg_type] [DEFAULT "default_value"]
[AFTER column_name|FIRST]
[TO rollup_index_name]
[PROPERTIES ("key"="value", ...)]

Note:

1. If you add a value column to an Aggregate table, you need to specify agg_type.
2. If you add a key column to a non-Aggregate table (such as a Duplicate Key table), you need to specify the KEY keyword.
3. You cannot add a column that already exists in the base index to the rollup index. (You can recreate a rollup index if needed.)

Add multiple columns to specified index

Syntax:

ALTER TABLE [database.]table
ADD COLUMN (column_name1 column_type [KEY | agg_type] DEFAULT "default_value", ...)
[TO rollup_index_name]
[PROPERTIES ("key"="value", ...)]

Note:

  1. If you add a value column to an aggregate table, you need to specify agg_type.

  2. If you add a key column to a non-aggregate table, you need to specify the KEY keyword.

  3. You cannot add a column that already exists in the base index to the rollup index. (You can create another rollup index if needed.)

Drop a column from specified index

Syntax:

ALTER TABLE [database.]table
DROP COLUMN column_name
[FROM rollup_index_name];

Note:

  1. You cannot drop partition column.
  2. If the column is dropped from the base index, it will also be dropped if it is included in the rollup index.

Modify the column type and column position of specified index

Syntax:

ALTER TABLE [database.]table
MODIFY COLUMN column_name column_type [KEY | agg_type] [NULL | NOT NULL] [DEFAULT "default_value"]
[AFTER column_name|FIRST]
[FROM rollup_index_name]
[PROPERTIES ("key"="value", ...)]

Note:

  1. If you modify the value column in aggregation models, you need to specify agg_type.

  2. If you modify the key column in non-aggregation models, you need to specify the KEY keyword.

  3. Only the type of column can be modified. The other properties of the column remain as they are currently. (i.e. other properties need to be explicitly written in the statement according to the original property, see example 8).

  4. The partition column cannot be modified.

  5. The following types of conversions are currently supported (accuracy loss is guaranteed by the user).

    • Convert TINYINT/SMALLINT/INT/BIGINT to TINYINT/SMALLINT/INT/BIGINT/DOUBLE.
    • Convert TINTINT/SMALLINT/INT/BIGINT/LARGEINT/FLOAT/DOUBLE/DECIMAL to VARCHAR. VARCHAR supports modification of maximum length.
    • Convert VARCHAR to TINTINT/SMALLINT/INT/BIGINT/LARGEINT/FLOAT/DOUBLE.
    • Convert VARCHAR to DATE (currently support six formats: "%Y-%m-%d", "%y-%m-%d", "%Y%m%d", "%y%m%d", "%Y/%m/%d, "%y/%m/%d")
    • Convert DATETIME to DATE(only year-month-day information is retained, i.e. 2019-12-09 21:47:05 <--> 2019-12-09)
    • Convert DATE to DATETIME (set hour, minute, second to zero, For example: 2019-12-09 <--> 2019-12-09 00:00:00)
    • Convert FLOAT to DOUBLE
    • Convert INT to DATE (If the INT data fails to convert, the original data remains the same)
  6. Conversion from NULL to NOT NULL is not supported.

Reorder the columns of specified index

Syntax:

ALTER TABLE [database.]table
ORDER BY (column_name1, column_name2, ...)
[FROM rollup_index_name]
[PROPERTIES ("key"="value", ...)]

Note:

  1. All columns in the index must be written.
  2. The value column is listed after the key column.

Modify table properties

Currently, StarRocks supports modifying the following table properties:

  • replication_num
  • default.replication_num
  • storage_cooldown_ttl
  • storage_cooldown_time
  • Dynamic partitioning related properties
  • enable_persistent_index
  • bloom_filter_columns
  • colocate_with

Syntax:

ALTER TABLE [<db_name>.]<tbl_name>
SET ("key" = "value",...)

Note: You can also modify the properties by merging into the above schema change operation. See the following examples.

Modify rollup index

Create a rollup index

Syntax:

ALTER TABLE [<db_name>.]<tbl_name> 
ADD ROLLUP rollup_name (column_name1, column_name2, ...)
[FROM from_index_name]
[PROPERTIES ("key"="value", ...)]

PROPERTIES: Support setting timeout time and the default timeout time is one day.

Example:

ALTER TABLE [<db_name>.]<tbl_name> 
ADD ROLLUP r1(col1,col2) from r0;

Create rollup indexes in batches

Syntax:

ALTER TABLE [<db_name>.]<tbl_name>
ADD ROLLUP [rollup_name (column_name1, column_name2, ...)
[FROM from_index_name]
[PROPERTIES ("key"="value", ...)],...];

Example:

ALTER TABLE [<db_name>.]<tbl_name>
ADD ROLLUP r1(col1,col2) from r0, r2(col3,col4) from r0;

Note:

  1. If from_index_name is not specified, then create from base index by default.
  2. The columns in the rollup table must be existing columns in from_index.
  3. In properties, user can specify the storage format. See CREATE TABLE for details.

Drop a rollup index

Syntax:

ALTER TABLE [<db_name>.]<tbl_name>
DROP ROLLUP rollup_name [PROPERTIES ("key"="value", ...)];

Example:

ALTER TABLE [<db_name>.]<tbl_name> DROP ROLLUP r1;

Batch drop rollup indexes

Syntax:

ALTER TABLE [<db_name>.]<tbl_name>
DROP ROLLUP [rollup_name [PROPERTIES ("key"="value", ...)],...];

Example:

ALTER TABLE [<db_name>.]<tbl_name> DROP ROLLUP r1, r2;

Note: You cannot drop the base index.

Modify bitmap indexes

Bitmap index supports the following modifications:

Create a bitmap index

Syntax:

 ALTER TABLE [database.]table
ADD INDEX index_name (column [, ...],) [USING BITMAP] [COMMENT 'balabala'];

Note:

1. Bitmap index is only supported for the current version.
2. A BITMAP index is created only in a single column.

Drop an index

Syntax:

DROP INDEX index_name;

Swap

Swap supports atomic exchange of two tables.

Syntax:

ALTER TABLE [database.]table
SWAP WITH table_name;

Examples

Table

  1. Modify the default number of replicas of the table, which is used as the default number of replicas for newly added partitions.

    ALTER TABLE example_db.my_table
    SET ("default.replication_num" = "2");
  2. Modify the actual number of replicas of a single-partition table.

    ALTER TABLE example_db.my_table
    SET ("replication_num" = "3");
  3. Modify data writing and replication mode among replicas.

    ALTER TABLE example_db.my_table
    SET ("replicated_storage" = "false");

    This example sets the data writing and replication mode among replicas to "leaderless replication", which means data is written to multiple replicas at the same time without differentiating primary and secondary replicas. For more information, see the replicated_storage parameter in CREATE TABLE.

Partition

  1. Add a partition and use the default bucketing mode. The existing partition is [MIN, 2013-01-01). The added partition is [2013-01-01, 2014-01-01).

    ALTER TABLE example_db.my_table
    ADD PARTITION p1 VALUES LESS THAN ("2014-01-01");
  2. Add a partition and use the new number of buckets.

    ALTER TABLE example_db.my_table
    ADD PARTITION p1 VALUES LESS THAN ("2015-01-01")
    DISTRIBUTED BY HASH(k1) BUCKETS 20;
  3. Add a partition and use the new number of replicas.

    ALTER TABLE example_db.my_table
    ADD PARTITION p1 VALUES LESS THAN ("2015-01-01")
    ("replication_num"="1");
  4. Alter the number of replicas for a partition.

    ALTER TABLE example_db.my_table
    MODIFY PARTITION p1 SET("replication_num"="1");
  5. Batch alter the in_memory property of specified partitions.

    ALTER TABLE example_db.my_table
    MODIFY PARTITION (p1, p2, p4) SET("in_memory"="true");
  6. Batch alter the storage medium of all partitions.

    ALTER TABLE example_db.my_table
    MODIFY PARTITION (*) SET("storage_medium"="HDD");
  7. Drop a partition.

    ALTER TABLE example_db.my_table
    DROP PARTITION p1;
  8. Add a partition that has upper and lower boundaries.

    ALTER TABLE example_db.my_table
    ADD PARTITION p1 VALUES [("2014-01-01"), ("2014-02-01"));

Rollup

  1. Create an index example_rollup_index based on the base index (k1,k2,k3,v1,v2). Column-based storage is used.

    ALTER TABLE example_db.my_table
    ADD ROLLUP example_rollup_index(k1, k3, v1, v2)
    PROPERTIES("storage_type"="column");
  2. Create an index example_rollup_index2 based on example_rollup_index(k1,k3,v1,v2).

    ALTER TABLE example_db.my_table
    ADD ROLLUP example_rollup_index2 (k1, v1)
    FROM example_rollup_index;
  3. Create an index example_rollup_index3 based on the base index (k1, k2, k3, v1). The rollup timeout time is set to one hour.

    ALTER TABLE example_db.my_table
    ADD ROLLUP example_rollup_index3(k1, k3, v1)
    PROPERTIES("storage_type"="column", "timeout" = "3600");
  4. Drop an index example_rollup_index2.

    ALTER TABLE example_db.my_table
    DROP ROLLUP example_rollup_index2;

Schema Change

  1. Add a key column new_col (non-aggregate column) after the col1 column of example_rollup_index.

    ALTER TABLE example_db.my_table
    ADD COLUMN new_col INT KEY DEFAULT "0" AFTER col1
    TO example_rollup_index;
  2. Add a value column new_col (non-aggregate column) after the col1 column of example_rollup_index.

    ALTER TABLE example_db.my_table
    ADD COLUMN new_col INT DEFAULT "0" AFTER col1
    TO example_rollup_index;
  3. Add a key column new_col (aggregate column) after the col1 column of example_rollup_index.

    ALTER TABLE example_db.my_table
    ADD COLUMN new_col INT DEFAULT "0" AFTER col1
    TO example_rollup_index;
  4. Add a value column new_col SUM (aggregate column) after the col1 column of example_rollup_index.

    ALTER TABLE example_db.my_table
    ADD COLUMN new_col INT SUM DEFAULT "0" AFTER col1
    TO example_rollup_index;
  5. Add multiple columns to example_rollup_index (aggregate).

    ALTER TABLE example_db.my_table
    ADD COLUMN (col1 INT DEFAULT "1", col2 FLOAT SUM DEFAULT "2.3")
    TO example_rollup_index;
  6. Drop a column from example_rollup_index.

    ALTER TABLE example_db.my_table
    DROP COLUMN col2
    FROM example_rollup_index;
  7. Modify the column type of col1 of the base index to BIGINT and put it after col2.

    ALTER TABLE example_db.my_table
    MODIFY COLUMN col1 BIGINT DEFAULT "1" AFTER col2;
  8. Modify the maximum length of the val1 column of the base index to 64. The original length is 32.

    ALTER TABLE example_db.my_table
    MODIFY COLUMN val1 VARCHAR(64) REPLACE DEFAULT "abc";
  9. Reorder the columns in example_rollup_index. The original column order is k1, k2, k3, v1, v2.

    ALTER TABLE example_db.my_table
    ORDER BY (k3,k1,k2,v2,v1)
    FROM example_rollup_index;
  10. Perform two operations (ADD COLUMN and ORDER BY) at one time.

    ALTER TABLE example_db.my_table
    ADD COLUMN v2 INT MAX DEFAULT "0" AFTER k2 TO example_rollup_index,
    ORDER BY (k3,k1,k2,v2,v1) FROM example_rollup_index;
  11. Alter the bloomfilter columns of the table.

    ALTER TABLE example_db.my_table
    SET ("bloom_filter_columns"="k1,k2,k3");

    This operation can also be merged into the above schema change operation (note that the syntax of multiple clauses is slightly different).

    ALTER TABLE example_db.my_table
    DROP COLUMN col2
    PROPERTIES ("bloom_filter_columns"="k1,k2,k3");
  12. Alter the Colocate property of the table.

    ALTER TABLE example_db.my_table
    SET ("colocate_with" = "t1");
  13. Alter the bucketing mode of the table from Random Distribution to Hash Distribution.

    ALTER TABLE example_db.my_table
    SET ("distribution_type" = "hash");
  14. Alter the dynamic partition property of the table.

    ALTER TABLE example_db.my_table
    SET ("dynamic_partition.enable" = "false");

    If you need to add dynamic partition properties to a table with no dynamic partition properties configured, you need to specify all the dynamic partition properties.

    ALTER TABLE example_db.my_table
    SET (
    "dynamic_partition.enable" = "true",
    "dynamic_partition.time_unit" = "DAY",
    "dynamic_partition.end" = "3",
    "dynamic_partition.prefix" = "p",
    "dynamic_partition.buckets" = "32"
    );
  15. Alter the in_memory property of the table.

    ALTER TABLE example_db.my_table
    SET ("in_memory" = "true");

Rename

  1. Rename table1 to table2.

    ALTER TABLE table1 RENAME table2;
  2. Rename rollup index rollup1 of example_table to rollup2.

    ALTER TABLE example_table RENAME ROLLUP rollup1 rollup2;
  3. Rename partition p1 of example_table to p2.

    ALTER TABLE example_table RENAME PARTITION p1 p2;

Index

  1. Create a bitmap index for column siteid in table1.

    ALTER TABLE table1
    ADD INDEX index_1 (siteid) [USING BITMAP] COMMENT 'balabala';
  2. Drop the bitmap index of column siteid in table1.

    ALTER TABLE table1
    DROP INDEX index_1;

Swap

  1. Atomic swap between table1 and table2.

    ALTER TABLE table1 SWAP WITH table2

References