Skip to main content
Version: 2.5

Load data using Stream Load transaction interface

From v2.4 onwards, StarRocks provides a Stream Load transaction interface to implement two-phase commit (2PC) for transactions that are run to load data from external systems such as Apache Flink® and Apache Kafka®. The Stream Load transaction interface helps improve the performance of highly concurrent stream loads.

This topic describes the Stream Load transaction interface and how to load data into StarRocks by using this interface.

Description

The Stream Load transaction interface supports using an HTTP protocol-compatible tool or language to call API operations. This topic uses curl as an example to explain how to use this interface. This interface provides various features, such as transaction management, data write, transaction pre-commit, transaction deduplication, and transaction timeout management.

note

Stream Load supports CSV and JSON file formats. This method is recommended if you want to load data from a small number of files whose individual sizes do not exceed 10 GB. Stream Load does not support Parquet file format. If you need to load data from Parquet files, use INSERT+files().

Transaction management

The Stream Load transaction interface provides the following API operations, which are used to manage transactions:

  • /api/transaction/begin: starts a new transaction.

  • /api/transaction/commit: commits the current transaction to make data changes persistent.

  • /api/transaction/rollback: rolls back the current transaction to abort data changes.

Transaction pre-commit

The Stream Load transaction interface provides the /api/transaction/prepare operation, which is used to pre-commit the current transaction and make data changes temporarily persistent. After you pre-commit a transaction, you can proceed to commit or roll back the transaction. If your StarRocks cluster breaks down after a transaction is pre-committed, you can still proceed to commit the transaction after your StarRocks cluster is restored to normal.

NOTE

After the transaction is pre-committed, do not continue to write data using the transaction. If you continue to write data using the transaction, your write request returns errors.

Data write

The Stream Load transaction interface provides the /api/transaction/load operation, which is used to write data. You can call this operation multiple times within one transaction.

Transaction deduplication

The Stream Load transaction interface carries over the labeling mechanism of StarRocks. You can bind a unique label to each transaction to achieve at-most-once guarantees for transactions.

Transaction timeout management

You can use the stream_load_default_timeout_second parameter in the configuration file of each FE to specify a default transaction timeout period for that FE.

When you create a transaction, you can use the timeout field in the HTTP request header to specify a timeout period for the transaction.

When you create a transaction, you can also use the idle_transaction_timeout field in the HTTP request header to specify a timeout period within which the transaction can stay idle. If no data is written within the timeout period, the transaction automatically rolls back.

Benefits

The Stream Load transaction interface brings the following benefits:

  • Exactly-once semantics

    A transaction is split into two phases, pre-commit and commit, which make it easy to load data across systems. For example, this interface can guarantee exactly-once semantics for data loads from Flink.

  • Improved load performance

    If you run a load job by using a program, the Stream Load transaction interface allows you to merge multiple mini-batches of data on demand and then send them all at once within one transaction by calling the /api/transaction/commit operation. As such, fewer data versions need to be loaded, and load performance is improved.

Limits

The Stream Load transaction interface has the following limits:

  • Only single-database single-table transactions are supported. Support for multi-database multi-table transactions is in development.

  • Only concurrent data writes from one client are supported. Support for concurrent data writes from multiple clients is in development.

  • The /api/transaction/load operation can be called multiple times within one transaction. In this case, the parameter settings specified for all of the /api/transaction/load operations that are called must be the same.

  • When you load CSV-formatted data by using the Stream Load transaction interface, make sure that each data record in your data file ends with a row delimiter.

Precautions

  • If the /api/transaction/begin, /api/transaction/load, or /api/transaction/prepare operation that you have called returns errors, the transaction fails and is automatically rolled back.
  • When calling the /api/transaction/begin operation to start a new transaction, you must specify a label. Note that the subsequent /api/transaction/load, /api/transaction/prepare, and /api/transaction/commit operations must use the same label as the /api/transaction/begin operation.
  • If you the label of a previous transaction to call the /api/transaction/begin operation to start a new transaction, the previous transaction will fail and be rolled back.
  • The default column separator and row delimiter that StarRocks supports for CSV-formatted data are \t and \n. If your data file does not use the default column separator or row delimiter, you must use "column_separator: <column_separator>" or "row_delimiter: <row_delimiter>" to specify the column separator or row delimiter that is actually used in your data file when calling the /api/transaction/load operation.

Before you begin

Check privileges

You can load data into StarRocks tables only as a user who has the INSERT privilege on those StarRocks tables. If you do not have the INSERT privilege, follow the instructions provided in GRANT to grant the INSERT privilege to the user that you use to connect to your StarRocks cluster.

Check network configuration

Make sure that the machine on which the data you want to load resides can access the FE and BE nodes of the StarRocks cluster via the http_port (default: 8030) and be_http_port (default: 8040) , respectively.

Basic operations

Prepare sample data

This topic uses CSV-formatted data as an example.

  1. In the /home/disk1/ path of your local file system, create a CSV file named example1.csv. The file consists of three columns, which represent the user ID, user name, and user score in sequence.

    1,Lily,23
    2,Rose,23
    3,Alice,24
    4,Julia,25
  2. In your StarRocks database test_db, create a Primary Key table named table1. The table consists of three columns: id, name, and score, of which id is the primary key.

    CREATE TABLE `table1`
    (
    `id` int(11) NOT NULL COMMENT "user ID",
    `name` varchar(65533) NULL COMMENT "user name",
    `score` int(11) NOT NULL COMMENT "user score"
    )
    ENGINE=OLAP
    PRIMARY KEY(`id`)
    DISTRIBUTED BY HASH(`id`) BUCKETS 10;

Start a transaction

Syntax

curl --location-trusted -u <username>:<password> -H "label:<label_name>" \
-H "Expect:100-continue" \
-H "db:<database_name>" -H "table:<table_name>" \
-XPOST http://<fe_host>:<fe_http_port>/api/transaction/begin

Example

curl --location-trusted -u <jack>:<123456> -H "label:streamload_txn_example1_table1" \
-H "Expect:100-continue" \
-H "db:test_db" -H "table:table1" \
-XPOST http://<fe_host>:<fe_http_port>/api/transaction/begin

NOTE

For this example, streamload_txn_example1_table1 is specified as the label of the transaction.

Return result

  • If the transaction is successfully started, the following result is returned:

    {
    "Status": "OK",
    "Message": "",
    "Label": "streamload_txn_example1_table1",
    "TxnId": 9032,
    "BeginTxnTimeMs": 0
    }
  • If the transaction is bound to a duplicate label, the following result is returned:

    {
    "Status": "LABEL_ALREADY_EXISTS",
    "ExistingJobStatus": "RUNNING",
    "Message": "Label [streamload_txn_example1_table1] has already been used."
    }
  • If errors other than duplicate label occur, the following result is returned:

    {
    "Status": "FAILED",
    "Message": ""
    }

Write data

Syntax

curl --location-trusted -u <username>:<password> -H "label:<label_name>" \
-H "Expect:100-continue" \
-H "db:<database_name>" -H "table:<table_name>" \
-T <file_path> \
-XPUT http://<fe_host>:<fe_http_port>/api/transaction/load

NOTE

When calling the /api/transaction/load operation, you must use <file_path> to specify the save path of the data file you want to load.

Example

curl --location-trusted -u <jack>:<123456> -H "label:streamload_txn_example1_table1" \
-H "Expect:100-continue" \
-H "db:test_db" -H "table:table1" \
-T /home/disk1/example1.csv \
-H "column_separator: ," \
-XPUT http://<fe_host>:<fe_http_port>/api/transaction/load

NOTE

For this example, the column separator used in the data file example1.csv is commas (,) instead of StarRocks‘s default column separator (\t). Therefore, when calling the /api/transaction/load operation, you must use "column_separator: <column_separator>" to specify commas (,) as the column separator.

Return result

  • If the data write is successful, the following result is returned:

    {
    "TxnId": 1,
    "Seq": 0,
    "Label": "streamload_txn_example1_table1",
    "Status": "OK",
    "Message": "",
    "NumberTotalRows": 5265644,
    "NumberLoadedRows": 5265644,
    "NumberFilteredRows": 0,
    "NumberUnselectedRows": 0,
    "LoadBytes": 10737418067,
    "LoadTimeMs": 418778,
    "StreamLoadPutTimeMs": 68,
    "ReceivedDataTimeMs": 38964,
    }
  • If the transaction is considered unknown, the following result is returned:

    {
    "TxnId": 1,
    "Label": "streamload_txn_example1_table1",
    "Status": "FAILED",
    "Message": "TXN_NOT_EXISTS"
    }
  • If the transaction is considered in an invalid state, the following result is returned:

    {
    "TxnId": 1,
    "Label": "streamload_txn_example1_table1",
    "Status": "FAILED",
    "Message": "Transcation State Invalid"
    }
  • If errors other than unknown transaction and invalid status occur, the following result is returned:

    {
    "TxnId": 1,
    "Label": "streamload_txn_example1_table1",
    "Status": "FAILED",
    "Message": ""
    }

Pre-commit a transaction

Syntax

curl --location-trusted -u <username>:<password> -H "label:<label_name>" \
-H "Expect:100-continue" \
-H "db:<database_name>" \
-XPOST http://<fe_host>:<fe_http_port>/api/transaction/prepare

Example

curl --location-trusted -u <jack>:<123456> -H "label:streamload_txn_example1_table1" \
-H "Expect:100-continue" \
-H "db:test_db" \
-XPOST http://<fe_host>:<fe_http_port>/api/transaction/prepare

Return result

  • If the pre-commit is successful, the following result is returned:

    {
    "TxnId": 1,
    "Label": "streamload_txn_example1_table1",
    "Status": "OK",
    "Message": "",
    "NumberTotalRows": 5265644,
    "NumberLoadedRows": 5265644,
    "NumberFilteredRows": 0,
    "NumberUnselectedRows": 0,
    "LoadBytes": 10737418067,
    "LoadTimeMs": 418778,
    "StreamLoadPutTimeMs": 68,
    "ReceivedDataTimeMs": 38964,
    "WriteDataTimeMs": 417851
    "CommitAndPublishTimeMs": 1393
    }
  • If the transaction is considered not existent, the following result is returned:

    {
    "TxnId": 1,
    "Label": "streamload_txn_example1_table1",
    "Status": "FAILED",
    "Message": "Transcation Not Exist"
    }
  • If the pre-commit times out, the following result is returned:

    {
    "TxnId": 1,
    "Label": "streamload_txn_example1_table1",
    "Status": "FAILED",
    "Message": "commit timeout",
    }
  • If errors other than non-existent transaction and pre-commit timeout occur, the following result is returned:

    {
    "TxnId": 1,
    "Label": "streamload_txn_example1_table1",
    "Status": "FAILED",
    "Message": "publish timeout"
    }

Commit a transaction

Syntax

curl --location-trusted -u <username>:<password> -H "label:<label_name>" \
-H "Expect:100-continue" \
-H "db:<database_name>" \
-XPOST http://<fe_host>:<fe_http_port>/api/transaction/commit

Example

curl --location-trusted -u <jack>:<123456> -H "label:streamload_txn_example1_table1" \
-H "Expect:100-continue" \
-H "db:test_db" \
-XPOST http://<fe_host>:<fe_http_port>/api/transaction/commit

Return result

  • If the commit is successful, the following result is returned:

    {
    "TxnId": 1,
    "Label": "streamload_txn_example1_table1",
    "Status": "OK",
    "Message": "",
    "NumberTotalRows": 5265644,
    "NumberLoadedRows": 5265644,
    "NumberFilteredRows": 0,
    "NumberUnselectedRows": 0,
    "LoadBytes": 10737418067,
    "LoadTimeMs": 418778,
    "StreamLoadPutTimeMs": 68,
    "ReceivedDataTimeMs": 38964,
    "WriteDataTimeMs": 417851
    "CommitAndPublishTimeMs": 1393
    }
  • If the transaction has already been committed, the following result is returned:

    {
    "TxnId": 1,
    "Label": "streamload_txn_example1_table1",
    "Status": "OK",
    "Message": "Transaction already commited",
    }
  • If the transaction is considered not existent, the following result is returned:

    {
    "TxnId": 1,
    "Label": "streamload_txn_example1_table1",
    "Status": "FAILED",
    "Message": "Transcation Not Exist"
    }
  • If the commit times out, the following result is returned:

    {
    "TxnId": 1,
    "Label": "streamload_txn_example1_table1",
    "Status": "FAILED",
    "Message": "commit timeout",
    }
  • If the data publish times out, the following result is returned:

    {
    "TxnId": 1,
    "Label": "streamload_txn_example1_table1",
    "Status": "FAILED",
    "Message": "publish timeout",
    "CommitAndPublishTimeMs": 1393
    }
  • If errors other than non-existent transaction and timeout occur, the following result is returned:

    {
    "TxnId": 1,
    "Label": "streamload_txn_example1_table1",
    "Status": "FAILED",
    "Message": ""
    }

Roll back a transaction

Syntax

curl --location-trusted -u <username>:<password> -H "label:<label_name>" \
-H "Expect:100-continue" \
-H "db:<database_name>" \
-XPOST http://<fe_host>:<fe_http_port>/api/transaction/rollback

Example

curl --location-trusted -u <jack>:<123456> -H "label:streamload_txn_example1_table1" \
-H "Expect:100-continue" \
-H "db:test_db" \
-XPOST http://<fe_host>:<fe_http_port>/api/transaction/rollback

Return result

  • If the rollback is successful, the following result is returned:

    {
    "TxnId": 1,
    "Label": "streamload_txn_example1_table1",
    "Status": "OK",
    "Message": ""
    }
  • If the transaction is considered not existent, the following result is returned:

    {
    "TxnId": 1,
    "Label": "streamload_txn_example1_table1",
    "Status": "FAILED",
    "Message": "Transcation Not Exist"
    }
  • If errors other than not existent transaction occur, the following result is returned:

    {
    "TxnId": 1,
    "Label": "streamload_txn_example1_table1",
    "Status": "FAILED",
    "Message": ""
    }

References

For information about the suitable application scenarios and supported data file formats of Stream Load and about how Stream Load works, see Loading from a local file system via Stream Load.

For information about the syntax and parameters for creating Stream Load jobs, see STREAM LOAD.