Skip to main content
Version: Latest-3.3

Use HDFS for shared-data

This topic describes how to deploy and use a shared-data StarRocks cluster. This feature is supported from v3.0 for S3 compatible storage and v3.1 for Azure Blob Storage.

NOTE

  • StarRocks version 3.1 brings some changes to the shared-data deployment and configuration. Please use this document if you are running version 3.1 or higher.
  • If you are running version 3.0 please use the 3.0 documentation.
  • Shared-data StarRocks clusters do not support data BACKUP and RESTORE.

The shared-data StarRocks cluster is specifically engineered for the cloud on the premise of separation of storage and compute. It allows data to be stored in object storage (for example, AWS S3, Google GCS, Azure Blob Storage, and MinIO). You can achieve not only cheaper storage and better resource isolation, but elastic scalability for your cluster. The query performance of the shared-data StarRocks cluster aligns with that of a shared-nothing StarRocks cluster when the local disk cache is hit.

In version 3.1 and higher the StarRocks shared-data cluster is made up of Frontend Engines (FEs) and Compute Nodes (CNs). The CNs replace the classic Backend Engines (BEs) in shared-data clusters.

Compared to the classic shared-nothing StarRocks architecture, separation of storage and compute offers a wide range of benefits. By decoupling these components, StarRocks provides:

  • Inexpensive and seamlessly scalable storage.
  • Elastic scalable compute. Because data is not stored in Compute Nodes (CNs), scaling can be done without data migration or shuffling across nodes.
  • Local disk cache for hot data to boost query performance.
  • Asynchronous data ingestion into object storage, allowing a significant improvement in loading performance.

Architecture

Shared-data Architecture

Deploy a shared-data StarRocks cluster

The deployment of a shared-data StarRocks cluster is similar to that of a shared-nothing StarRocks cluster. The only difference is that you need to deploy CNs instead of BEs in a shared-data cluster. This section only lists the extra FE and CN configuration items you need to add in the configuration files of FE and CN fe.conf and cn.conf when you deploy a shared-data StarRocks cluster. For detailed instructions on deploying a StarRocks cluster, see Deploy StarRocks.

NOTE

Do not start the cluster until after it is configured for shared-storage in the next section of this document.

Configure FE nodes for shared-data StarRocks

Before starting FEs, add the following configuration items in the FE configuration file fe.conf.

Example FE configurations for HDFS

These are example shared-data additions for your fe.conf file on each of your FE nodes.

run_mode = shared_data
cloud_native_meta_port = <meta_port>
cloud_native_storage_type = HDFS

# Example: hdfs://127.0.0.1:9000/user/starrocks/
cloud_native_hdfs_url = <hdfs_url>

run_mode

The running mode of the StarRocks cluster. Valid values:

  • shared_data
  • shared_nothing (Default)

NOTE

  • You cannot adopt the shared_data and shared_nothing modes simultaneously for a StarRocks cluster. Mixed deployment is not supported.
  • Do not change run_mode after the cluster is deployed. Otherwise, the cluster fails to restart. The transformation from a shared-nothing cluster to a shared-data cluster or vice versa is not supported.

cloud_native_meta_port

The cloud-native meta service RPC port.

  • Default: 6090

enable_load_volume_from_conf

Whether to allow StarRocks to create the default storage volume by using the object storage-related properties specified in the FE configuration file. Valid values:

  • true (Default) If you specify this item as true when creating a new shared-data cluster, StarRocks creates the built-in storage volume builtin_storage_volume using the object storage-related properties in the FE configuration file, and sets it as the default storage volume. However, if you have not specified the object storage-related properties, StarRocks fails to start.
  • false If you specify this item as false when creating a new shared-data cluster, StarRocks starts directly without creating the built-in storage volume. You must manually create a storage volume and set it as the default storage volume before creating any object in StarRocks. For more information, see Create the default storage volume.

Supported from v3.1.0.

CAUTION

We strongly recommend you leave this item as true while you are upgrading an existing shared-data cluster from v3.0. If you specify this item as false, the databases and tables you created before the upgrade become read-only, and you cannot load data into them.

cloud_native_storage_type

The type of object storage you use. In shared-data mode, StarRocks supports storing data in Azure Blob (supported from v3.1.1 onwards), and object storages that are compatible with the S3 protocol (such as AWS S3, Google GCP, and MinIO). Valid value:

  • S3 (Default)
  • AZBLOB
  • HDFS

NOTE

  • If you specify this parameter as S3, you must add the parameters prefixed by aws_s3.
  • If you specify this parameter as AZBLOB, you must add the parameters prefixed by azure_blob.
  • If you specify this parameter as HDFS, you must add the parameter cloud_native_hdfs_url.

cloud_native_hdfs_url

The URL of your HDFS storage, for example, hdfs://127.0.0.1:9000/user/xxx/starrocks/.

NOTE

Only credential-related configuration items can be modified after your shared-data StarRocks cluster is created. If you changed the original storage path-related configuration items, the databases and tables you created before the change become read-only, and you cannot load data into them.

If you want to create the default storage volume manually after the cluster is created, you only need to add the following configuration items:

run_mode = shared_data
cloud_native_meta_port = <meta_port>
enable_load_volume_from_conf = false

Configure CN nodes for shared-data StarRocks

Before starting CNs, add the following configuration items in the CN configuration file cn.conf:

starlet_port = <starlet_port>
storage_root_path = <storage_root_path>

starlet_port

The CN heartbeat service port for the StarRocks shared-data cluster. Default value: 9070.

storage_root_path

The storage volume directory that the local cached data depends on. Multiple volumes are separated by semicolon (;). Example: /data1;/data2.

The default value for storage_root_path is ${STARROCKS_HOME}/storage.

Local cache is effective when queries are frequent and the data being queried is recent, but there are cases that you may wish to turn off the local cache completely.

  • In a Kubernetes environment with CN pods that scale up and down in number on demand, the pods may not have storage volumes attached.
  • When the data being queried is in a data lake in remote storage and most of it is archive (old) data. If the queries are infrequent the data cache will have a low hit ratio and the benefit may not be worth having the cache.

To turn off the data cache set:

storage_root_path =

NOTE

The data is cached under the directory <storage_root_path>/starlet_cache.

Use your shared-data StarRocks cluster

The usage of shared-data StarRocks clusters is also similar to that of a classic shared-nothing StarRocks cluster, except that the shared-data cluster uses storage volumes and cloud-native tables to store data in object storage.

Create default storage volume

You can use the built-in storage volumes that StarRocks automatically creates, or you can manually create and set the default storage volume. This section describes how to manually create and set the default storage volume.

NOTE

If your shared-data StarRocks cluster is upgraded from v3.0, you do not need to define a default storage volume because StarRocks created one with the object storage-related properties you specified in the FE configuration file fe.conf. You can still create new storage volumes with other object storage resources and set the default storage volume differently.

To give your shared-data StarRocks cluster permission to store data in your object storage, you must reference a storage volume when you create databases or cloud-native tables. A storage volume consists of the properties and credential information of the remote data storage. If you have deployed a new shared-data StarRocks cluster and disallow StarRocks to create a built-in storage volume (by specifying enable_load_volume_from_conf as false), you must define a default storage volume before you can create databases and tables in the cluster.

The following example creates a storage volume def_volume for an HDFS storage, enables the storage volume, and sets it as the default storage volume:

CREATE STORAGE VOLUME def_volume
TYPE = HDFS
LOCATIONS = ("hdfs://127.0.0.1:9000/user/starrocks/");

SET def_volume AS DEFAULT STORAGE VOLUME;

For more information on how to create a storage volume for other object storages and set the default storage volume, see CREATE STORAGE VOLUME and SET DEFAULT STORAGE VOLUME.

Create a database and a cloud-native table

After you create a default storage volume, you can then create a database and a cloud-native table using this storage volume.

Shared-data StarRocks clusters support all StarRocks table types.

The following example creates a database cloud_db and a table detail_demo based on Duplicate Key table type, enables the local disk cache, sets the hot data validity duration to one month, and disables asynchronous data ingestion into object storage:

CREATE DATABASE cloud_db;
USE cloud_db;
CREATE TABLE IF NOT EXISTS detail_demo (
recruit_date DATE NOT NULL COMMENT "YYYY-MM-DD",
region_num TINYINT COMMENT "range [-128, 127]",
num_plate SMALLINT COMMENT "range [-32768, 32767] ",
tel INT COMMENT "range [-2147483648, 2147483647]",
id BIGINT COMMENT "range [-2^63 + 1 ~ 2^63 - 1]",
password LARGEINT COMMENT "range [-2^127 + 1 ~ 2^127 - 1]",
name CHAR(20) NOT NULL COMMENT "range char(m),m in (1-255) ",
profile VARCHAR(500) NOT NULL COMMENT "upper limit value 65533 bytes",
ispass BOOLEAN COMMENT "true/false")
DUPLICATE KEY(recruit_date, region_num)
DISTRIBUTED BY HASH(recruit_date, region_num)
PROPERTIES (
"storage_volume" = "def_volume",
"datacache.enable" = "true",
"datacache.partition_duration" = "1 MONTH"
);

NOTE

The default storage volume is used when you create a database or a cloud-native table in a shared-data StarRocks cluster if no storage volume is specified.

In addition to the regular table PROPERTIES, you need to specify the following PROPERTIES when creating a table for shared-data StarRocks cluster:

datacache.enable

Whether to enable the local disk cache.

  • true (Default) When this property is set to true, the data to be loaded is simultaneously written into the object storage and the local disk (as the cache for query acceleration).
  • false When this property is set to false, the data is loaded only into the object storage.

NOTE

In version 3.0 this property was named enable_storage_cache.

To enable the local disk cache, you must specify the directory of the disk in the CN configuration item storage_root_path.

datacache.partition_duration

The validity duration of the hot data. When the local disk cache is enabled, all data is loaded into the cache. When the cache is full, StarRocks deletes the less recently used data from the cache. When a query needs to scan the deleted data, StarRocks checks if the data is within the duration of validity starting from the current time. If the data is within the duration, StarRocks loads the data into the cache again. If the data is not within the duration, StarRocks does not load it into the cache. This property is a string value that can be specified with the following units: YEAR, MONTH, DAY, and HOUR, for example, 7 DAY and 12 HOUR. If it is not specified, all data is cached as the hot data.

NOTE

In version 3.0 this property was named storage_cache_ttl.

This property is available only when datacache.enable is set to true.

View table information

You can view the information of tables in a specific database using SHOW PROC "/dbs/<db_id>". See SHOW PROC for more information.

Example:

mysql> SHOW PROC "/dbs/xxxxx";
+---------+-------------+----------+---------------------+--------------+--------+--------------+--------------------------+--------------+---------------+------------------------------+
| TableId | TableName | IndexNum | PartitionColumnName | PartitionNum | State | Type | LastConsistencyCheckTime | ReplicaCount | PartitionType | StoragePath |
+---------+-------------+----------+---------------------+--------------+--------+--------------+--------------------------+--------------+---------------+------------------------------+
| 12003 | detail_demo | 1 | NULL | 1 | NORMAL | CLOUD_NATIVE | NULL | 8 | UNPARTITIONED | s3://xxxxxxxxxxxxxx/1/12003/ |
+---------+-------------+----------+---------------------+--------------+--------+--------------+--------------------------+--------------+---------------+------------------------------+

The Type of a table in shared-data StarRocks cluster is CLOUD_NATIVE. In the field StoragePath, StarRocks returns the object storage directory where the table is stored.

Load data into a shared-data StarRocks cluster

Shared-data StarRocks clusters support all loading methods provided by StarRocks. See Loading options for more information.

Query in a shared-data StarRocks cluster

Tables in a shared-data StarRocks cluster support all types of queries provided by StarRocks. See StarRocks SELECT for more information.

NOTE

Shared-data StarRocks clusters do not support synchronous materialized views.